Powder Metal Products:
Minimum possible weight of the part:: | 0,005 kg |
Maximum possible weight of the part: | 1 kg |
Minimum possible sizes of the part: | 10 mm x 10 mm x 10 mm |
Maximum possible sizes of the part: | 100 mm x 100 mm x 70 mm |
Minimum possible wall thickness: | 1 mm |
Maximum possible wall thickness: | 10 mm |
Tolerances achieved by pressing and sintering: | +/- 0,05 mm |
Tolerances achieved by post-machining: | 0,001 mm |
Minimum possible batch: | From 3000 parts |
Powder Metal Products:
- Gears, bearings, sprockets, fasteners, electrical contacts, cutting tools, and various machinery parts.
- Advantage of PM: parts can be made to near net shape or net shape
- They require little or no additional shaping after PM processing
- When produced in large quantities, gears and bearings are ideal for PM because: The geometry is defined in two dimensions and need for porosity in the part to serve as a reservoir for lubricant.
More Information: www.paoyuebrands.com
Additional Resource:
https://en.wikipedia.org/wiki/Powder_metallurgy